NEC POWERMATE CT 815 - RELEASE NOTES, Инструкция по обслуживанию и справочник, Страница: 82 / 155

3-30 Disassembly and Reassembly
Removing the Front LED/Switch Bracket
A – Front LED/Switch Bracket
Chassis Intrusion Switch
Remove the chassis intrusion switch from the rear edge of the chassis as follows.
1.
Remove the system cover (see “Removing the Cover”).
2.
Unplug the chassis intrusion switch cable from its header on the system board.
3.
Press together the tabs that hold the chassis intrusion switch to the chassis (see the
following figure).
Removing the Chassis Intrusion Switch
A – Tab B – Chassis Intrusion Switch
4.
Once the tabs are free, gently push the chassis intrusion switch through its cutout in the
chassis wall.
5.
Set the intrusion switch aside.