NEC POWERMATE 5100 - SERVICE, Руководство пользователя

Страница: 41 / 287

2-6 Setting Up the System
2.
Exit the application program.
3. Make sure that the hard drive, diskette drive, and any
drives are not in use. A lit device lamp indicates that the
device is in use.
!
CAUTION
Wait until a program is finished running before
powering off the system.
Unless absolutely necessary, never power off the
system when the system power lamp is amber or
when either the hard drive lamp, diskette drive,
or other device lamp is lit. Information on the
device might be lost or damaged.
4. Click
Start
on the taskbar, then point to and click
Shut
Down
. Selecting
Shut Down
gives you several choices in
the pop-up submenu. Select
Shut down the computer
,
then click
Yes
or press
Enter
to shut down the computer.
Note:
A message appears informing you
when it is safe to turn off the system.
5. Turn off power to the monitor.
6.
Power off the system by pressing the system unit power
button. The system powers off after a 5- to 10-second
delay.