NEC POWERMATE 5100 - SERVICE, Руководство пользователя

Страница: 40 / 287

Setting Up the System 2-5
Note:
These messages are part of the
system’s Power-On Self-Test (POST). The
computer is checking the hardware for any
changes since the last startup. If you want to see
the messages displayed during POST, press
ESC. If you want to go into the Setup Utility,
press F2.
One beep indicates that the system has successfully
completed the power-on test. After about 5 seconds,
Windows starts up.
If a problem occurs, a series of beeps may sound. If this
happens repeatedly after powering on, power off the system
and turn to Chapter 6, “Solving System Problems.” This
chapter provides some helpful hints on obvious system
problems.
Note:
If the system displays a message
indicating that system settings have changed,
run the BIOS Setup utility (see Chapter 3,
“Configuring the System”).
On PowerMate systems loaded with the Windows NT
®
4.0
operating system, press
Ctrl-Alt-Del
when prompted on-
screen to do so. The log-on box appears for entering a
password.
Shutdown
Follow these steps to shut down (power off) the computer.
1.
Save your work. See the documentation that comes with
the application.