NEC POWERMATE 5100 - SERVICE, Руководство по обслуживанию

Страница: 42 / 237

System Configuration 2-15
Peripheral Configuration Parameters
Menu Item Settings and Description
→
Base I/O Address
3F8, 2F8 (default), 3E8, 2E8
An asterisk (‘*’) displayed next to an address indicates a
conflict with another device.
This option only appears if Serial Port B is Enabled.
→
Interrupt
IRQ3 (default), IRQ4
An asterisk (‘*’) displayed next to an interrupt indicates a
conflict with another device.
This option only appears if Serial Port B is Enabled.
Parallel Port Disabled, Enabled (default), Auto
The parallel port device can be auto detected when Auto is
selected. With Auto, the first free LPT port is assigned. Auto
enables the device but the BIOS does not place its
resources unless the Plug and Play OS field is set to No.
Selecting Enabled enables Mode, Base I/O Address,
Interrupt, and DMA Channel.
→
Mode
Output only, Bi-directional, EPP, ECP
This option only appears if Parallel Port is Enabled.
→
Base I/O Address
278, 378, 3BC, 228
An asterisk (‘*’) displayed next to an address indicates a
conflict with another device.
This option only appears if Parallel Port is Enabled.
→
Interrupt
IRQ7, IRQ5
An asterisk (‘*’) displayed next to an interrupt indicates a
conflict with another device.
This option only appears if Parallel Port is set to Enabled.
An interrupt set to IRQ5 in a multimedia system might
conflict with the audio subsystem settings.
→
DMA Channel
DMA1, DMA3
DMA not displayed when Mode is Bi-directional
The DMA field is only displayed when the Parallel Port field
is set to Enabled, and the Mode field is set to ECP.
Audio Disabled, Enabled
Select Disabled if an audio board is installed.
Legacy USB Support Disabled, Enabled