NEC POWERMATE 5100 - SERVICE, Руководство по обслуживанию

Страница: 43 / 237

2-16 System Configuration
IDE Configuration
This menu configures IDE devices as they are added, removed, or changed. Use
the fields in the following table to configure the system when making any IDE
device changes.
IDE Device Configuration Parameters
Menu Item Settings and Description
IDE Controller Disabled, Primary, Secondary, Both
This field enables the primary, secondary, or both interface
connectors on the riser board.
Hard Disk Delay Disabled, 3 seconds, 6 seconds,
9 seconds, 12 seconds, 15 seconds,
21 seconds, 30 seconds
The hard disk pre-delay gives the hard drive time to spin up
before the system boots. Set a hard disk pre-delay if your
hard drive needs more time to spin up.
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave Device type, None
Device type, None
Device type, None
Device type, None
Each device menu item displays the Hard drive or CD-ROM
identifier if a device is installed.
If you install a hard drive that does not feature auto IDE type
detection or your IDE hard drive was formatted on another
system with parameters different from those reported by the
drive, enter a parameter for each of the fields in the device
submenu.
Press Enter to bring up a device submenu.
Type None, CD-ROM, IDE Removable, User,
ATAPI Removable, Auto
Defaults to Disabled and changes at boot time based on
auto-detection. When set to Auto, the values for Cylinders,
Heads, Sectors, and Maximum Capacity are displayed but
are read only.
When set to Auto, the BIOS detects what the drive is
capable of, not the translation mechanism that was used to
format the drive.
If a drive is run in a mode other than the mode in which it
was partitioned and formatted, unpredictable results may
occur, including data loss.