NEC NF1500-SR40E, Руководство пользователя

Страница: 95 / 106

D-19
2.
With the rail hook positioned at the rear of the rack, insert the rail into the rack, insert the
hook into the angle hole at the intended install position of the unit, and engage the hook with
the cutout.
NOTE: Two cutouts are provided: one for the new rack and the
other is for the old rack. The outer cutout should be used for the
new rack while the inner cutout should be used for the old rack.
3. Pull the rail toward you and insert the rivets on the rail into the round holes on the rack.
4.
While holding the rail, tighten the set screw (M4 screw).
Cutout for new rack
Cutout for old rack
Hook
Rivets
Set screw