NEC NF1500-SR40E, Руководство пользователя

Страница: 54 / 106

liii
Connection of the power cords
Power supply for NFx500-SR40E
Insert the receptacle of the power cord provided with the disk array unit into the power plug on the
power supply.
As shown in the left figure below, open the AC cable clamp, fit the power cord into it, and
lightly lock the clamp.
As shown in the right figure below, move the clamp in the direction indicated by the arrow,
and firmly secure the clamp near the root of the plug.
NOTE:
If the clamp is loosely locked, the power cord may
come off. To prevent this problem, firmly secure the AC cable
clamp near the root of the power cord.
(Power cord disconnection procedure)
As shown in the figure below, push the catch on the AC cable clamp to release the lock. After
releasing the lock, remove the AC cable clamp from the power cable.
Fit
AC cord
Clamp section
Spread
Cable clamp
Release
Catch