Prerequisites for
a New System Installation
2-4
•
You completed the procedures in the preceding installation documents:
-
Hardware Installation Guide
-
ESMPRO Manager User's Guide
The procedures in this guide must be completed if you needed to install,
configure, or upgrade the management server in your server network
environment.
•
System cables are attached to the partitions and Service Processors and are routed,
though not connected, to your network.
•
The firewall is in place for a LAN network without a dedicated operations LAN.
•
The system partitions are powered on.
Connecting the System to the Operations LAN or Public LAN
If your system met the preceding conditions, connect the system to the dedicated
operations LAN or public LAN at this time. Refer to the illustrations provided.
Caution
If you are installing multiple Express5800/A1160 systems and intend for them
to reside on the same LAN segment, connect only one system undergoing
installation to the network at this time. All Express5800/A1160 systems have
the same default Service Processor IP address when they are shipped from
the factory.
Having multiple systems with the default Service Processor IP address active
on the same LAN segment causes errors during the software installation and
system configuration process detailed in this document.
Содержание NECCare Platinum Express5800/A1160
