NEC N8154-24, Руководство пользователя

Страница: 67 / 68

22
⑤ When the following prompt is displayed, the SDR/PIA setup is completed.
Example)
⑥
With reference to N codes of the server, be sure to confirm SDR Rev as follows.
SDR Revision differs depending on the mounted CPU and optional product.
Target server
N8100-1668F/1669F/1670F/1671F/1672F
Power Supply type Redundant power unit Fixed power unit
HDD type
3.5-inch 2.5-inch 3.5-inch 2.5-inch
SDR Revision 00.xxc * 00.xxg 00.xxd 00.xxh
Product ID 055D
Target server
N8100-1665F/1666F/1667F
CPU Clock
2.4GHz(N8100-1665F)
2.66GHz(N8100-1666F)
2.93GHz(N8100-1667F)
SDR Revision 00.xxC * 00.xxA
Product ID 055A
*
case sensitivity
If “SDR Revision" is not match above list, please check again the jumper setting and cable
connecting.
Clear the event log
① Remove CD-ROM from the optical disk drive, and turn off/on power to reboot the server.
②
< F2 > key is pushed in POST, and BIOS SETUP is started.
③ Clear the event log by following procedure.
[Server] → [Event Log Configuration] → [Clear All Event Logs] → [Enter] → [YES]
Device ID : 38
Device Revision : 01
BMC Firmware Revision : 01.17
IPMI Version : 2.0
Product ID : 055A
Boot Firmware Revision : 00.17
PIA Revision : 01.06
SDR Revision : 00.03C
CFG Identify : A2MBHR
Self Test Results : 5500
All programming complete!!
Remove CD-R, reset the server for normal operation.
C:>