NEC N8154-24, Руководство пользователя

Страница: 61 / 68

16
– SGPIO cable
Use the SGPIO cable to connect the SGPIO connector (J3) on the back of the 2.5-inch disk
cage to the SGPIO B connector at the bottom of the motherboard.
–
Power cable
Connect the server power cable P8 to the power connector on the back of the 2.5-inch disk
cage that is further away from you (CN2), and connect the server power cable P7 to the
power connector on the back of the 2.5-inch disk cage that is closer to you (CN1).
–
SAS/SATA cable
If connecting up to four hard disk drives, connect the SAS/SATA connector (MINISAS_1)
on the back of the 2.5-inch disk cage that is further away from you and the connector
on the right side of the RAID controller mounted on the motherboard.
If connecting up to eight hard disk drives, connect the SAS/SATA connector (MINISAS_2)
on the back of the 2.5-inch disk cage that is closer to you and the connector on the left
side of the RAID controller mounted on the motherboard.
9.
Install the side cover.
Removal
Remove the disk cage in the reverse procedure of the installation.