6
Attention to Handling or Maintenance
Do not disassemble, repair, or alter the Built-in LTO.
Never attempt to disassemble, repair, or alter the Built-in LTO on any occasion other
than described in this User's Guide. Failure to follow this instruction may cause an
electric shock or a fire as well as malfunctions of the Built-in LTO.
The following can be performed by the Built-in LTO user. Do not perform any other
type of disassembly than described here.
Remove or install brackets
Remove or install the DC signal cable
Do not handle while the power plug is connected.
Before handling or cleaning the Built-in LTO, disconnect the power plug of the main
power unit from the outlet. If the power is off but the power plug is still connected,
you may get an electric shock.
Insert the cables into the connectors as far as it goes.
Heat generation resulting from a halfway inserted cables or Interface cables
(imperfect contact) may cause a fire. Heat will also be generated if condensation is
formed on dusty blades of the halfway inserted cable, increasing the possibility of a
fire.
