25
CLEANING
To keep the drive is the best condition for securing the customer
’
s data, periodical cleaning
is required.
Cleaning the Read/Write Head
When the cleaning notice is indicated on the Single Character Display, clean the Built-in
LTO internal read/write head
Set the provided cleaning cartridge or our cleaning cartridge into the drive based on the
procedure which is described as
“
Set the Data Cartridge
”
in the
“
HANDLING
”
section in
page 21 .
When the cleaning cartridge is set into the Built-In LTO, the cleaning operation is
automatically started.
After cleaning, the cleaning cartridge is automatically ejected.
Use our Cleaning cartridge to clean the Built-In LTO. If you use a cleaner of the other
manufacturer, a machine failure may be caused. LTO Cleaning Cartridge can be
used for around 50 times
Perform the cleaning operation when the cleaning is required by the display.
Cleaning the Built-in LTO
If the Built-in LTO looks dirty, gently wipe its surface with soft cloth moistened with water or
detergent
Do not clean the Built-In LTO using chemicals such as benzene or thinner (volatile
chemicals), which may cause the drive to be deformed or discolored. For the same
reason, do not spray insecticide. If a chemical adheres to the drive surface,
immediately wipe it with soft cloth moistened with water.
