4. Glossary
Express5800/R120h-1M, R120h-2M (2nd-Gen) Maintenance Guide
134
Chapter 3 Appendix
4.
Glossary
Terms
Description
AHS
Active Health System (AHS) monitors the status/configuration of the server, and records
it to a log file if any changes occur. AHS log is used for maintenance to investigate the
failure.
AMP
Advanced Memory Protection (AMP) is a technology for realizing a fault tolerance of the
server by memory redundancy (such as mirroring).
AMS
Agentless Management Service (AMS) is an OS service for sending information (such as
OS events) that iLO cannot collect directly. iLO records the information recieved by AMS,
and send it to Agentless Management.
EXPRESSBUILDER
Software for setting up the server. EXPRESSBUILDER
can be started by pressing
<F10> key during POST.
Express Report Service
Software that can report the server failure to the contact center by E-mail or modem. This
software is installed with NEC ESMPRO ServerAgentService to the server.
Express Report Service
(HTTPS)
Software that can report the server failure to the contact center by HTTPS. This software
is installed with NEC ESMPRO ServerAgentService to the server.
Hexalobular
A type of screw head characterized by a 6-point star-shaped pattern. This is often called
as "Torx" (the Torx is a third party’s trademark). Head sizes are described from T1 to
T100. This is sometimes abbreviated as 6lobe.
iLO
A built-in controller that supports the IPMI version 2.0 protocol. The controller is called as
iLO5 because this server adopts a generation 5 version controller.
NEC ESMPRO
ServerAgentService
Software for monitoring the server. This works with NEC ESMPRO Manager. You can
choose Service Mode or Non-Service Mode when installing this software. Service Mode
resides as the OS service and Non-Service Mode does not use the OS service to reduce
memory, CPU power, and other OS resources.
NEC ESMPRO Manager
Software for managing a number of servers on network.
PC for Management
A computer for managing the server on network. A general Windows/Linux computer can
be used as "PC for Management".
Product Info Collection Utility
Software for collecting several hardware/software statuses and event logs. You can
easily collect the data for the server maintenance by using this software.
RAID Report Service
This service monitors the RAID status and notifies failures.
RBSU
ROM-Based Setup Utility (RBSU) is a built-in utility that can configure connected devices
and BIOS settings. RBSU is called from System Utilities.
RESTful Interface Tool
A tool that supports API based on Representational State Transfer (REST) architecture.
You can send maintenance commands in JSON format to iLO by HTTP protocol after
installing this tool.
SID
System Insight Display (SID) is an optional product that can indicate the statuses of each
device on motherboard.
SPP
Standard Program Package (SPP) is a software package that includes BIOS, FW, driver,
and other basic software. SPP is included in Starter Pack.
SSA
Smart Storage Administrator (SSA) is a utility that can configure RAID arrays. SSA is
provided for Windows/Linux and can also start from F10 key function.
Starter Pack
A software package that includes SPP, instruction manual, application, and other
software for the server. This must be installed before using OS on the server. Starter
Pack is provided as an optional product and ISO data on our website.
System Maintenance Switch
A DIP switch on motherboard. This switch can enable/disable initialization, password, iLO
settings, and other functions of maintenance.
System Utilities
System Utilities is a built-in utility that provides system information, calling RBSU,
collecting system log, and other system utilities. You can start System Utilities by F9 key
during POST.
TPM Kit
An optional product of Trusted Platform Module for the server.