1. System BIOS
Express5800/E120d-M Maintenance Guide
54
Chapter 2 Convenient Features
(2) Memory Configuration submenu
From the
Advanced
menu, select
Memory Configuration
and then press the <Enter> key to display the menu
screen shown below. For the menu that has
on the left, move the cursor to it and then press the <Enter> key
to show its submenus.
For details about the options, see the table below.
Option
Parameter
Descriptions
Memory Information
–
–
Hardware Memory Test
[Disabled]
Enabled
Enable or disable to execute memory test during POST.
If a memory error is detected while this option is set to
Enabled
, the relevant memory resource is degraded.
Memory Retest
[No]
Yes
When this option is set to
Yes
, error information on
memory is cleared, and all DIMMs are reconfigured at
the next startup.
No
is automatically selected after
DIMMs are reconfigured.
Memory Frequency Limit
[Auto]
800 MHz
1066 MHz
1333 MHz
1600 MHz
Specify the upper limit of operating frequency of memory.
The operating frequency may be lowered than the
specified value depending on memory configuration.
Memory Voltage
1.5 V
[1.35 V]
Specify the operating voltage of memory. The memory
voltage may differ from that specified in this parameter
depending on memory configuration.
NUMA
Disabled
[Enabled]
Enable or disable Non-Uniform Memory Access feature.
This option is displayed only in multi-processor
configuration..
Patrol Scrub
[Disabled]
Enabled
Enable or disable memory RAS feature (Patrol
Scrubbing).
Demand Scrub
Disabled
[Enabled]
Enable or disable memory RAS feature (Demand
Scrubbing).
[ ]: Factory settings