NEC N8100-1078F, Руководство пользователя

Страница: 96 / 332

4-28 Configuring Your Server
NOTES:
„
Before adding a new drive to an array, back up any data contained
on the new drive. Otherwise, all data will be lost.
„
If you stop the Build or Clear process on a RAID1 from ACU, you
can only restart it from Adaptec Storage Manager - Browser Edition.
(See Chapter 6 for details.)
„
A RAID1 created using the Quick Init option may return some data
miscompares if you later run a consistency check. This is normal
and is not a cause for concern.
„
The ACU allows you to use drives of different sizes in a RAID1.
During a build operation however, only the smaller drive can be
selected as the source or first drive.
„
When migrating from single volume to RAID0, migrating from a
larger drive to a smaller drive is allowed. However the destination
drive must be at least half the capacity of the source drive.
„
Adaptec does not recommend that you migrate or build an array on
Windows dynamic disks (volumes), as it will result in data loss.
5.
Select a source drive from the Select Source Drive list box and press Enter .
6.
When you are finished, press Done .