NEC N8100-1078F, Руководство пользователя

Страница: 193 / 332

Troubleshooting 8-11
Beep Codes
The following table lists the POST error beep codes. Prior to system video initialization, the BIOS
uses these beep codes to inform users of error conditions.
Number
of Beeps
Description Recommended Action
1 Memory refresh timer error
2 Parity error in base memory (first
64KB block)
3 Base memory read / write test error
Reseat the memory, or replace with known good
modules.
4 Motherboard timer not operational
5 Processor error
6 8042 Gate A20 test error (cannot
switch to protected mode)
7 General exception error (processor
exception error)
Fatal error indicating a serious problem with the
system. Consult your system manufacturer.
Before declaring the motherboard beyond all
hope, eliminate the possibility of interference by a
malfunctioning add-in card. Remove all expansion
cards except the video adapter.
- If beep codes are generated even when all other
expansion cards are absent, consult your
system manufacturer’s technical support.
- If beep codes are not generated when all other
expansion cards are absent, one of the add-in
cards is causing the malfunction. Insert the
cards back into the system one at a time until the
problem happens again. This will reveal the
malfunctioning add-in card.
8 Display memory error (system video
adapter) If the system video adapter is an add-in card,
replace or reseat the video adapter. If the video
adapter is an integrated part of the system board,
the board may be faulty.
9 ROM checksum error
10 CMOS shutdown register read/write
error
11 Cache memory test failed
Fatal error indicating a serious problem with the
system. Consult your system manufacturer.
Before declaring the motherboard beyond all
hope, eliminate the possibility of interference by a
malfunctioning add-in card. Remove all expansion
cards except the video adapter.
- If beep codes are generated even when all other
expansion cards are absent, consult your
system manufacturer’s technical support.
- If beep codes are not generated when all other
expansion cards are absent, one of the add-in
cards is causing the malfunction. Insert the
cards back into the system one at a time until the
problem happens again. This will reveal the
malfunctioning add-in card.