NEC N8100-1078F, Руководство пользователя

Страница: 190 / 332

8-8 Troubleshooting
POST Error Messages
When POST detects an error, it displays an error message on the display unit screen. The
following table lists error codes, error messages, and actions to take.
IMPORTANT: Take a note on the messages displayed before
consulting with your sales agent. Alarm messages are useful
information for maintenance.
The response section in the following table is divided into three types:
„
Warning:
The message is displayed on screen and the error is logged to the SEL. The system will
continue booting with a degraded state.
„
Pause:
The message is displayed on the screen and the boot process is paused until the appropriate
input is given to either continue the boot process or take corrective action.
„
Halt:
The system cannot boot unless the error is corrected.
Error
Code
Error Message Response
0000 Timer Error Pause
0003 CMOS Battery Low Pause
0004 CMOS Settings Wrong Pause
0005 CMOS Checksum Bad Pause
0008 Unlock Keyboard Halt
0009 PS2 Keyboard not found Not an error
000A KBC BAT Test failed Halt
000B CMOS memory size different Pause
000C RAM R/W test failed Pause
000E A: Drive Error Pause
000F B: Drive Error Pause
0010 Floppy Controller Failure Pause
0012 CMOS time not set Pause
0014 PS2 Mouse not found Not an error
0040 Refresh timer test failed Halt
0041 Display memory test failed Pause
0042 CMOS Display Type Wrong Pause
0043 ~<INS> Pressed Pause
0044 DMA Controller Error Halt
0045 DMA-1 Error Halt
0046 DMA-2 Error Halt
0047 Unknown BIOS error. Error code = 147 (this is really a
PMM_MEM_ALLOC_ERR) Halt
0048 Password check failed Halt
0049 Unknown BIOS error. Error code = 149 (this is really
SEGMENT_REG_ERR) Halt
004A Unknown BIOS error. Error code = 14A (this is really ADM_MODULE_ERR) Pause