manualshive.com logo in svg

NEC N8100-1078F, Руководство пользователя

Поделиться
Скачать
NEC N8100-1078F Скачать руководство пользователя страница 4

SYMBOLS USED IN THIS MANUAL AND WARNING LABELS

Attentions

Indicates that improper use may cause an electric shock.

Indicates that improper use may cause personal injury.

Indicates that improper use may cause fingers to be caught.

Indicates that improper use may cause fumes or fire.

Indicates a general notice or warning that cannot be specifically identified.

Indicates that improper use may cause loss of eyesight due to laser beam.

Prohibited Actions

Indicates a general prohibited action that cannot be specifically identified.

Do not disassemble, repair, or modify the server.    Otherwise, an electric shock or fire
may be caused.

Mandatory Action

Unplug the power cord of the server.    Otherwise, an electric shock or fire may be
caused.

Indicates a mandatory action that cannot be specifically identified.  Make sure to
follow the instruction.

Содержание N8100-1078F













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды