![background image](http://html1.mh-extra.com/html/nec/n8100-1056f/n8100-1056f_user-manual_4226546086.webp)
3-12 Setting Up Your Server
Installing the Server
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
Do not lift the server only by a single person.
Do not pinch your finger with mechanical components.
1.
Pull out the sliding rails of the right and left rail assemblies until they are locked.
2.
At least two persons are required to install the server. Securely hold the server and
install it in the rack.
Firmly fit the inner rails on the sides of the server into the rail assemblies that are installed
on the rack, and then slowly push the server into the rack.
If the server is locked on its way into the rack, slowly push it in while pressing the release
levers on the right and left sides of the server.
When the server is installed for the first time, the mechanical parts are rather hard to slide.
You may feel strong friction when pushing in the server. In this case, strongly push it in.
Release lever
Содержание N8100-1056F
