NEC Mobile Suite User Guide for N411i
Rev 1.0 6/May/2005
4.3.2.1
Controls
4.3.2.1.1 Resource selection icons
On the top of the MRM window (on the left of the module name) there are
four icons:
Images
,
Melodies
,
Movies
and
MP3
icon. The icon selected will be coloured, and the name will be displayed
on the left of the icons.
NOTE:
The same actions can be performed through the
View
menu, options
Images
,
Melodies
,
Movies
or
MP3
.
4.3.2.1.2 PC Area
Below the Resource selection buttons is the PC Area. This area shows the contents (images,
melodies, movies or MP3, depending on which Resource type the user selected, and embedded
directories) of a directory (user selectable) . Through it the user can select the Resources to be
transferred to the Phone. If the selected Resources are of Image type then a preview of it is shown in
the screen of the Phone picture. If it’s a Melody, Movie or MP3
a picture symbolizing it will be shown in
the Phone screen.
4.3.2.1.3 Phone Area
The Phone area is located under the PC area. In it the user can select the resources (images,
melodies, movies or MP3, depending on which Resource type is selected) to be transferred to the PC,
navigating through the folders structure, delete resources files and create new folders.
4.3.2.1.4 Preview Area
The Preview Area is located on the right side of the MRM window. It contains a picture of the phone
that is being used (detected) and the preview of the image file selected will be done on the phone
display.
4.3.2.1.5 Pop-up menu
A pop-up menu is available in both PC and Phone Areas. With a right-click the user has access to two
options whose actions are always carried out in the selected area. The options are the following:
New Folder – Creates a new folder on the selected area. If the selected area is the PC, the folder is
created on the hard disk.
Delete – Same as the
[Delete]
button.
4.3.2.1.6
4.3.2.1.7 Transfer UP Button
The button can be found between the two areas (PC and Phone). This button transfers the selected
Resources from the Phone to the PC
- it will NOT do the actual transfer (it just marks it by changing its
colour in the destination area). The actual transfer occurs when the
[Transfer]
button is pressed.
