NEC MT2200, Руководство пользователя

Страница: 37 / 192

2-19
Features
Removable Media Drive Bays
On the left side of the system above the diskette drive,
three 5 1/4-inch half-height bays (see Figure 2-5) are
designed for peripherals with removable media
(diskette, CD-ROM, tape cartridge). Any two adjacent
5 1/4-inch bays can be converted to a single full-height
bay. The 5 1/4-inch drives can be removed directly from
the front of the chassis after the 5 1/4-inch plastic
frame is removed. The bezel is retained by a thumb
screw and snap features and is accessible when the left
side panel and top panel are removed. Cosmetic filler
panels and metal EMI shields are installed over all
unused 5 1/4-inch bays.
Note: Because of the EMI generated by hard drives, the
increased susceptibility to ESD, and cooling
requirements, hard drives should not be installed in the
5 1/4-inch half-height bays.
On the left side of the system below the 5 1/4-inch
removable media drive bays, two built-in 3 1/2-inch
bays one of which contains a 3 1/2-inch diskette drive
that supports both 720 KB and 1.44 MB media (see
Figure 2-5).
Note: When optional SCSI removable media devices are
used, a SCSI termination resistors must be installed in
the last SCSI drive of the daisy chain cabling. All other
devices must have terminators removed.