FCC PART 68
This equipment complies with Part 68 of FCC rules. On the bottom of this
equipment is a label that contains, among other information, the FCC
registration number and ringer equivalence number (REN) for this
equipment. If requested, this information must be provided to the telephone
company.
All applicable registration jack USCOs, any facility interface codes and
service order codes associated with the service the equipment must be
connected.
The REN is used to determine the quantity of devices that may be
connected to the telephone line. Excessive RENs on the telephone line may
result in the devices not ringing in response to an incoming call. In most,
but not all areas, the sum of the RENs should not exceed five (5). To be
certain of the number of devices that may be connected to the line, as
determined by the total RENs contact the telephone company to determine
the maximum REN for the calling area.
If the MobilePro causes harm to the telephone network, the telephone
company will notify you in advance that temporary termination of service
may be required. But if advance notice isn't possible, the telephone
company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the operation of the equipment.
If this happens, the telephone company will advise you in advance to make
the necessary modifications to maintain uninterrupted service.
If you have trouble with the MobilePro, please contact NECC Support
Services at 1-800-632-4525 for repair and warranty information. If the
trouble is impacting the telephone network, the telephone company may
request you remove the equipment from the network until the problem is
resolved.
