4-2 Using the NEC MobilePro
POWERING ON AND OFF
Power on the NEC MobilePro as follows.
!
CAUTION
If you power off, then quickly power on the NEC Mo-
bilePro, your system may erroneously report the
presence of CompactFlash cards.
In addition, repeatedly powering off and quickly pow-
ering on, may cause data loss. NECC
recommends that you wait ten seconds after power-
ing off, before powering on the NEC MobilePro.
1.
Slide the display panel latch to the right. Lift the dis-
play panel up towards the rear of the unit.
!
CAUTION
Do not push the display panel beyond its pre-
designed stop point as you open the panel.
2.
Locate and press the Power button. To power off the
unit, press the Power button a second time.
Powering on and off