4-24 Using the NEC MobilePro
2.
Disconnect any peripheral devices attached to the Mo-
bilePro, such as the AC adapter.
3.
Remove the battery pack. See the section in Chapter 2,
“Removing and Inserting the Battery Pack,” for de-
tails.
4.
Turn over the MobilePro and locate the screw that
secures the ROM bay cover.
5.
Using a small screwdriver, remove the screw and the
bay cover. (The MobilePro does not power on when
the bay cover is removed.)
ROM bay cover
A
– ROM bay cover
6.
With the small screwdriver, remove the two screws on
the ROM module.
7.
Gently lift up the ROM module to disconnect it from
its connector and remove it from the bay.
8.
Insert the upgraded ROM module into the bay, align-
ing the connector on the module with the one in the
bay.
