E – 40
Aspect Ratio (not available for RGB, DVI digital and PC Card Viewer)
You can select the aspect ratio for input signal and display area re-
spectively.
Select the appropriate aspect ratio using the Select
,
,
▲
, or
▼
button.
NOTE:
When "Resolution" is set to "Native", this feature is not available, and the
stored settings and adjustments are invalid.
The screen size (width-to-height) is set for input signal and display area re-
spectively.
In Portrait mode, the screen size means height-to-width.
Noise Reduction (not available for RGB, DVI digital and PC
Card Viewer)
You can select three levels video noise reduction.
NOTE:
The lower the Noise Reduction level, the better the image quality by way
of higher video bandwidth.
This allows you to manually adjust the image horizontally and verti-
cally, and adjust Clock and Phase.
Horizontal/Vertical Position
.................... Adjusts the image location horizontally and vertically using
the
and
buttons.
This adjustment is made automatically when the Auto Adjust
is turned on.
NOTE:
In Portrait mode, the H-Position and V-Position work in reverse.
Clock ............ Use this item to fine tune the computer image or to remove
any vertical banding that might appear. This function adjusts
the clock frequencies that eliminate the horizontal banding in
the image.
Press the
and
buttons until the banding disappears.
This adjustment may be necessary when you connect your
computer for the first time. This adjustment is made auto-
matically when the Auto Adjust is turned on.
Phase ........... Use this item to adjust the clock phase or to reduce video
noise, dot interference or cross talk. (This is evident when
part of your image appears to be shimmering.) Use the
and
buttons to adjust the image.
Position/ Clock (when Auto Adjust is off)
This allows you to activate or deactivate the Advanced AccuBlend fea-
ture.
Auto ............. Turns on the Advanced AccuBlend feature. The projector au-
tomatically reduces or enlarges the current image to fit the
full screen.
Native ........... Turns off the Advanced AccuBlend feature. The projector dis-
plays the current image in its true resolution.
See "Auto Adjust” on page E-45 for turning on or off the Auto Adjust
feature.
NOTE:
While you are displaying an image with higher resolution than the
projector's native resolution, even when you are in the Native mode, the image
is displayed full screen using the Advanced AccuBlend feature.
Resolution (when Auto Adjust is off)
Video Filter (when Auto Adjust is off)
This function reduces video noise.
On ................ The low-pass filter is applied.
Off ................ The filter is removed.
Screen adjustments are possible even when the filter is On.
Overscan (RGB and DVI digital only)
You can select overscan percentage for RGB signal.
Select the appropriate option using the Select
or
button.
NOTE:
When "Resolution" is set to "Native", this feature is not available, and the
stored settings and adjustments are invalid.
See "Auto Adjust” on page E-45 for turning on or off the Auto Adjust
feature.
Use "Phase" only after the "Clock" is complete.
This adjustment is made automatically when the Auto Adjust is turned
on.
Содержание GT950 - MultiSync XGA LCD Projector
Страница 6: ......
