1. Turning on the Server
Express5800/T120h User’s Guide
181
Chapter 3 Setup
3.
After a while, the following message is displayed on the screen. (The on-screen message depends
on your environment.)
By pressing the function key following messages, you can call the functions below upon completion of
POST.
<F9> key:
Start System Utility. See
Chapter 3 (2 System Utility)
.
<F10> key:
Run EXPRESSBUILDER. For details, see
Chapter 3 (4. EXPRESSBUILDER and
Starter Pack)
.
<F11> key:
Start Boot Menu. See
Chapter 3 (2 System Utility)
.
<F12> key:
Boot from network.
Regarding designated utilities, see instruction documents attached to each option board.
Necessary key inputs are different depending on option boards installed, so you are requested to
operate according to messages.
4.
The OS starts when POST is completed.
Tips
When no bootable device is connected, the following message is
displayed by terminating POST.
‑
No bootable devices were detected
‑
Please attach a UEFI bootable device.
‑
System will automatically retry the UEFI Boot Order in x seconds.
POST error messages
Error message appears on screen if POST detects an error. For details, see
Chapter 3 (1. IML Error Message)
in "
Maintenance Guide
".
Note
Write down the error message before calling your sales representative.
Error messages are useful information for maintenance.
