5. Checking the Duplicating Operation of Modules
Express5800/R320c-E4, R320c-M4 Maintenance Guide (Linux)
48
Chapter 1 Maintenance
5. Start the CPU module stopped.
Select the stopped CPU module and select
Start
of
Start/Stop
.
Tips
When the CPU module is started,
Hardware diagnosis
and then
synchronization of
memory (memory copy)
are performed, and the duplication process is completed.
Note that the system is paused temporarily for copying memory during memory
synchronization.
Indications of status LEDs after completion of duplication
LED
CPU/IO module 0 (Operating)
CPU/IO module 1 (Operating)
1 PRIMARY LED
On (Green)
–
2 DISK ACCESS LED
Blinking (Green)
(Lights green when accessing the
disk drive)
Blinking (Green)
(Lights green when accessing the
disk drive)
LED
System
3 System FT LED
On (Green)
Important After duplication is completed, the System FT LED lights in green. Do not perform
the evaluation of start and stop unless the above process is completed.
