5. Installing Optional Devices
Express5800/R320c-E4, R320c-M4 Maintenance Guide (Linux)
118
Chapter 2 Configuring and Upgrading the System
ft server utility
Select
ftServer
-
CPU Module
-
CPU Module (to be removed)
-
CPU Module Start/Stop – Stop
.
Repeat the steps above for the PCI module and confirm that the status of the CPU/IO module and
the IO module (PCI module) are "
Removed
".
Tips
When removing CPU/IO module 0, select
Stop
for CPU module (ID:0) and PCI module
(ID:10)
2. Remove the front bezel
3. Disconnect the power cord of a module to be removed.
The stopper will go down when you disconnect the cable.
Note
Check whether the stopper goes down after disconnecting the power cord. If you
disconnect the cable and the stopper does not go down, you cannot pull out the CPU/IO
module in the next step.
Stopper
