![background image](http://html.mh-extra.com/html/nec/express5800-r120d-1e/express5800-r120d-1e_using-manual_251286015.webp)
- 15 -
(2) Displayed values for CPU throttling and memory throttling
■
EXPRESSSCOPE Engine 3 : [Configuration]
→
[BMC]
→
[ECO]
■
NEC ESMPRO Manager : [Remote Control]
→
[Electric Power Management]
→
[ECO Setting]
→
[Power Capping]
■
ROM Utility :
Turn on the power of the server and the following message appears at the lower left of the
screen.
Press <F2> to enter SETUP, <F4> ROM Utility, <F12> Network
Press the <F4> key to enter ROM Utility.
Select [KB_Select]
→
[BMC Configuration]
→
[BMC Configuration]
→
[ECO]
→
[Configuration].
a. The [Maximum] value for [CPU Throttling]
The displayed value for the CPU throttling rate may reach "100%" while initializing the server,
however, the throttling does not reach 100% in the actual operations. This is only a displayed
value and there is no impact on the performance.
b. The [Current] value for [Memory Throttling]
The displayed value for the memory throttling rate may differ from the actual behavior when
[Aggressive Mode] is enabled for the power control setting. This is only a displayed value and
there is no impact on the actual power consumption.
Ex.) Screenshot of EXPRESSSCOPE Engine 3
a
b