NEC Express5800/340Hb-R N8800-047F, Руководство пользователя

Страница: 79 / 312

Windows Setup and Operation 3-3
Disks Operations Using Disk Management
Disk Management
NEC Express5800/ft series (which does not support the RDR function) ensures reliability by
executing software mirroring to hard disk volumes using Windows. Use Windows’ “Disk
Management” to manipulate volumes.
Refer to the online help for the operating procedures of “Disk Management”.
Steps to refer to the help of operating procedures:
1.
Click [Start] - [Help and Support].
2.
Select [Disks and Data] from the topics on the help.
3.
Select [Managing Disks and Volumes] - [Disk Management] - [How To…], then check the
operating procedures.
Hard Disk Configurations that can be built on the NEC Express5800/ft
series
In the NEC Express5800/ft series, all volumes need creation of mirror disks. You can create mirror
disks only on the dynamic simple volume as shown in the table below.
Volume type Can/cannot be built
Dynamic simple volume
√
Dynamic span volume –
Dynamic mirror volume –
Dynamic stripe volume –
Dynamic RAID5 volume –
Create mirror disks by selecting disks that are in the same slot of the SCSI enclosure. For example,
if the hard disks are positioned as shown in the table below, define hard disks 0 and 3, hard disks 1
and 4, and hard disks 2 and 5 as mirrored pairs.