NEC Express5800/340Hb-R N8800-047F, Руководство пользователя

Страница: 121 / 312

Windows Setup and Operation 3-45
Evaluate Start and Stop of Expansion PCI Modules
This section describes how to confirm the continuous system operation after stopping one of the
expansion PCI modules.
1.
Confirm that the expansion PCI modules are duplicated.
To check if the expansion PCI modules are duplicated, see the status LEDs of the expansion
PCI modules.
[Indications of status LEDs when expansion PCI modules are duplicated]
1
2
LED
Expansion PCI
module#1
(Operating)
Expansion PCI
module#2
(Operating)
1 Expansion PCI module status LED1 - -
2 Expansion PCI module status LED2 Green Green
2.
Use the ft server utility to stop the operation of an expansion PCI module to remove.
From [Start], select [All Programs], [NEC ESMPRO Agent] then [ft server utility] to start the
ft server utility. Then, from the [FTServer] tree on the left pane of the ft server utility, select
[PCI Module] then the expansion PCI module to stop, and click [Down] of [Bring Up/Bring
Down].
* On the ft server utility, the PCI module (ID: 13) corresponds to the expansion PCI
module #1, and the PCI module (ID: 12) corresponds to the expansion PCI module #2.
When you stop the operation of an expansion PCI module, the indications of the status LEDs