NEC Express5800/120Rf-1, Руководство пользователя

Страница: 369 / 408

Installing Windows Server 2003 E-5
INSTALLING WINDOWS SERVER 2003
Preparations for Installation
„
NEC EXPRESSBUILDER CD-ROM
„
Microsoft Windows Server 2003 R2 Standard Edition / Microsoft Windows Server 2003
R2 Enterprise Edition / Microsoft Windows Server 2003 Standard Edition / Microsoft
Windows Server 2003 Enterprise Edition (CD-ROM)
„
User's Guide
„
Getting Started
„
Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER
„
Windows Server 2003 Service Pack (CD-ROM)
Creating "Windows Server 2003 OEM-DISK for NEC
EXPRESSBUILDER"
Before installing, create Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER.
NOTE:
If you have already "Windows Server 2003 OEM-DISK for
NEC EXPRESSBUILDER" for NEC Express5800 Server which you
are going to install Windows Server 2003, you do not need to create it
again.
You can create Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER with the
following two procedures.
„
Create from the menu which appears when running NEC Express5800 Server with NEC
EXPRESSBUILDER.
If you have only NEC Express5800 Server to create Windows Server 2003 OEM-DISK
for NEC EXPRESSBUILDER, use this procedure.
If Windows Server 2003 or Windows 2000 can be operated on NEC Express5800 Server,
you can use the other procedure described later.
Follow the steps below.
1.
Prepare one 3.5-inch floppy disk.
2.
Turn on your NEC Express5800 Server.
3.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
4.
Press the RESET switch or press Ctrl + Alt + Delete to reboot the server .(You may also
turn off and then on again to reboot the server.)
The system will boot from the CD-ROM and NEC EXPRESSBUILDER starts.
5.
Select [Create Support Disk] from [Tools].