NEC Express5800/120Rf-1, Руководство пользователя

Страница: 111 / 408

Configuring Your Server 4-15
Server
Option Parameter Description Your Setting
System
Management – System Management submenu is
displayed.
Console
Redirection – Console Redirection submenu is displayed.
Assert NMI on
PERR Disabled
[Enabled] Specify whether to support PCI PERR or
not.
Assert NMI on
SERR Disabled
[Enabled] Specify whether to support PCI SERR or
not.
FRB-2 Policy Disable FRB2
Timer
[Retry 3 Times] Set the FRB level 2 timer.
Boot Monitoring [Disabled]
5 Minutes
10 Minutes
15 Minutes
20 Minutes
25 Minutes
30 Minutes
35 Minutes
40 Minutes
45 Minutes
50 Minutes
55 Minutes
60 Minutes
Specify whether to enable or disable the
boot monitoring function on booting, or
select the time limit for timeout.
To use this function, install NEC ESMPRO
Agent. Set this item to "Disabled" if the
system is booted from OS without
installation of NEC ESMPRO Agent.
Boot Monitoring
Policy [Retry 3 Times]
Retry Service Boot
Always Reset Specify the processing at the occurrence of
timeout during boot monitoring.
If [Retry 3 times] is selected, the system is
reset after the occurrence of timeout and
OS boot is retried up to three times.
If [Retry Service Boot] is selected, the
system is reset after the occurrence of
timeout and OS boot is retried up to three
times. Then the boot is tried from the
service partition for three times. The failure
in the third boot causes the system to stop
booting.
If [Always Reset] is selected, the system is
reset after the occurrence of timeout and
OS boot is retried repeatedly.
* If no service partition exists in the
system, OS boot is retried repeatedly
from the system partition.
Thermal
Sensor Disabled
[Enabled] Specify whether to enable or disable the
thermal sensor monitoring function. If a
thermal error is detected with this item
being set to "Enabled", the system stops at
the end of POST.
Post Error
Pause Disabled
[Enabled] Specify whether to stop the POST once at
the end of POST if an error occurs during
the POST.