![background image](http://html.mh-extra.com/html/nec/express5800-120rd-1/express5800-120rd-1_service-manual_251198032.webp)
12 Service Guide
4.8.7 Riser
Card
Removal
1) Remove the top cover according to the User's Guide.
2) Remove the riser card with the bracket according to the User's Guide.
3) If a PCI card is installed, remove it.
4) Remove the two screws, and remove the riser card from the bracket.
Screws
Installation
Install the riser card in reverse order of the removal steps.
NOTE:
There are catches on the riser card frame that are used to secure
the riser card to the cabinet. When inserting the riser card confirm that the
catches are correctly fit into the holes on the rear of the cabinet. After the
insertion, push the riser card with your fingers until you cannot see any
part of the riser card terminal section. The riser card is now fully seated in
the slot.
Содержание EXPRESS5800/120Rd-1
