![background image](http://html.mh-extra.com/html/nec/express5800-120md-series/express5800-120md-series_user-manual_251192122.webp)
4-30
Upgrading Your System
Installing a RAID Controller Board
Use this procedure to install a RAID controller board.
1.
Install the RAID controller board into any PCI expansion slot on the system
board. See subsection
Installing an Option Board
earlier in this chapter.
2.
Cable the RAID controller board as described below (see System Cabling in
Appendix C):
!
Remove the end of the SCSI interface cable that is plugged into the Ultra-
160/m SCSI connector (B) on the system board (A), see Figure 4-20.
B
C
A
Figure 4-20. Locating the Ultra-160/m SCSI connector
!
Recable SCSI interface cable by passing it to the RAID controller board
(B), as shown in Figure 4-21.
!
Reconnect the end of the SCSI interface cable just removed into the
Channel 2 connector (A) on the RAID controller board (B), as shown in
Figure 4-21.
Figure 4-21. Recabling the SCSI Interface Cable to the RAID Card
Содержание EXPRESS5800/120Md Series
