4-34
Upgrading Your System
Figure 4-23. Removing the Rack Front Panel
5.
Each empty media bay has a blank panel. From the media bay where you
want to install a drive, release the two tabs on each side of the blank panel
and remove the panel, see Figure 4-24. Then remove the device side rails
from each side of the blank panel for reinstallation on the 5 1/4-inch device
(see Figure 4-25) and save the blank panel for future use.
Note:
When installing a full height 5 1/4-inch device,
remove two blank panels.
Figure 4-24. Removing the Blank Panel
6.
Remove the device from its protective wrapper and place it on an antistatic
surface. Record the drive model and serial number in the equipment log.
7.
Set any device jumpers or switches on the device. Refer to the installation
procedures that come with the device.
Note:
All 5 1/4-inch devices must have terminators
removed.
8.
Attach the device slide rails removed in step 5 above (see Figure 4-25) and
secure with four screws (two screws per side).
Содержание EXPRESS5800/120Md Series
