![background image](http://html.mh-extra.com/html/nec/express5800-120md-series/express5800-120md-series_user-manual_251192114.webp)
4-22
Upgrading Your System
Removing DIMMs
Use extreme care when removing a DIMM. Too much
pressure can damage the socket slot. Apply only enough
pressure on the plastic ejector levers to release the DIMM.
1.
Observe the safety and ESD precautions listed at the beginning of this
chapter.
2.
Power off the system, unplug the power cord(s), and remove the option
board cover as described earlier in this chapter. Set the option board cover
aside for reinstallation later.
3.
Remove the processor cooling baffle. See
Removing the Cooling Baffle
earlier in this chapter. Set the cooling baffle aside for reinstallation later.
Observe static precautions. Use an antistatic wrist strap.
Hold DIMMs only by their edges.
4.
Gently push the plastic ejector levers out and down to eject a DIMM from its
socket.
5.
Hold the DIMM only by its edges, being careful not to touch its components
or gold edge connectors. Carefully lift it away from the socket, and store it
in an antistatic package.
6.
Repeat steps 4 and 5 above to remove the remaining DIMMs.
7.
Replace the processor cooling baffle (see “Removing or Installing the
Cooling Baffle” earlier in this section) removed earlier in these procedures.
8.
Reinstall the option board cover removed earlier in these procedures.
9.
Plug in the power cords and power up the system.
10.
Run the BIOS Setup and select
Memory Reconfiguration
on the
Advanced
Menu
to verify that the status of the added memory shows
Normal
.
Содержание EXPRESS5800/120Md Series
