![background image](http://html1.mh-extra.com/html/nec/electra-elite-ipk-ii/electra-elite-ipk-ii_system-hardware-manual_3854176241.webp)
Electra Elite IPK II
Document Revision 3
System Hardware Manual
6 - 99
___________________________________________________________________________________
___________________________________________________________________________________
7.2.1.1
System Board Components
are listed and described in
Table 6-34 System Board Components
Item
Description
A
Backplane connector
B
Switch SW2
Not used. Keep indicated default settings.
C
Switch SW1
Not used. Keep indicated default settings.
D
Port Expansion Board (PEB) cable
E
Modem connector
F
Hard Drive (HD) LED
G
Universal Serial Bus (USB) connector
H
Local Area Network (LAN) connector
I
Keyboard connector
J
Mouse connector
K
COM Serial Port connector
L
VGA Monitor connector
M
Switch SW3
DIP switch 1 default is Off so the voice messaging
application starts when the board is turned On. Set
this switch On to start OS/2 software only.
DIP switch 2 default is Off for direct serial remote
access connections. Set this switch On for modem
connections.
DIP switches 3 and 4 are not used and should be left
On.
N
The power button cuts the power to the board from
the PC and the hard drive and should not be used.
O
Voice messaging software LED
Green when software is active
Amber when active with possible application problem
Red when inactive or shut down
Содержание ELECTRA ELITE IPK II
