NEC ELECTRA ELITE IPK II, Руководство по аппаратному обеспечению системы, Страница: 472 / 642

___________________________________________________________________________________
9 - 66 Installing Electra Elite IPK II Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3.11.2 Installation
1. Connect the provided 25’ Cat. 5 cable between the LINK OUT
jack of the base unit and the LINK IN jack of the conferencing
pod.
2. Connect the provided RJ-11 cable between the base unit and
the telephone jack.
3. Connect the power cord to the base unit and plug it in an
electrical outlet.
4. To connect additional units, connect a 12’ Cat. 5 cable between
the LINK OUT jack of the unit connected to the base unit and
the LINK IN jack of the second unit and repeat the connection
of another 12’ Cat. 5 cable between the LINK OUT jack of each
unit to the LINK IN of the next unit in sequence.
3.11.3 Keypad Functions
Refer to Table 9-13 Keypad Functions .
Table 9-13 Keypad Functions
Key Function
ON/OFF key
(telephone icon) Press to activate the telephone and access dial tone.
Press again to hang up and return to standby mode.
PHONEBOOK (book
icon) Press to dial stored numbers. Press and hold two
seconds to enter Phonebook Edit mode.
REDIAL (circular arrow
icon) Press once to dial the last number called. Press and
hold two seconds to enter Program mode.
CONFERENCE (three
person icon) Press to dial the conferencing service provider. This
feature must be programmed.
FLASH (lightning flash
icon)
Press to enable call forwarding, call waiting, or
three-way calling when supported by telephone
service.
CLEAR ( vertical line
and left arrow icon)
Press to clear the last digit entered or press and hold to
clear all numbers.
Press to exit programming mode.
VOLUME (loud and
dim speaker icons)
Press during call to adjust call volume or press while
telephone is ringing or in standby mode to adjust ringer
volume.
MUTE (mike with
diagonal line icon)