___________________________________________________________________________________
13 - 4
Installing Cordless and Wireless Telephones
___________________________________________________________________________________
Document Revision 3
Electra Elite IPK II
3.
Raise the antenna to a vertical position.
4.
Make sure the status LED is On. When the LED is not On, check to see
that the AC adapter is plugged in and that the handset makes good
contact with the base charging contacts.
H
Use only the supplied AC adapter (730627).
H
Connect the AC adapter to a continuous power supply.
H
Place the base unit close to the AC outlet so you can unplug the
AC adapter easily.
H
After installing the battery pack in the handset, charge the handset
at least three to five hours before plugging it into the telephone line.
5.
Connect the telephone line cord to the TEL LINE jack and the other end
to the AP(R)-R Unit. Refer to paragraph
for detailed instructions for installing the
AP(R)-R Unit. This unit can also be connected using an SLI(4)/(8)-U( )
ETU.
Figure 13-4 Connecting the D
term
Headset Cordless
Telephone Cord to the AP(R)-R Unit
Telephone Line Cord
(supplied)
AP(R)-R Unit
To TEL LINE
Содержание ELECTRA ELITE IPK II
