Section 2: Customizing Features
DS1000/2000 Quick Setup Guide
Section 2: Customizing Features
◆
2-25
2
The following chart lists the available Programmable Function Key assignments. For more on features asso-
ciated with these keys, refer to the
Software Manual
on your
System Document CD
.
Programming
To assign an extension’s Programmable Function Keys:
1.
Enter the programming mode. You see:
2.
Enter
1701
+
HOLD
. You see:
3.
Enter the number of the keyset extension you want to program (e.g., 300) +
HOLD
. You see:
4.
Enter the number of the key you want to program (1-24) + HOLD. You see:
The previously programmed assignment displays.
5.
For the key selected, enter the code for the feature you want to assign plus any additional data (see the
chart below) +
VOL Up
.
You can optionally press
ICM
+
VOL Up
to scroll through the available key options.
•
Account Code
•
Intercom Directory
Dialing
•
Park Orbit
•
Call Coverage
•
Line Key
•
Reverse Voice Over
•
Call Forwarding
•
Loop Key, Fixed
•
Save
•
Call Timer
•
Loop Key, Switched
•
Speed Dial, Personal
•
Group Pickup
•
Message Center
•
Speed Dial, System
•
Headset Key
•
Night Key
•
Split Key
•
Hotline
•
Page Zones
•
Voice Mail Record Key
USER: nnn
ENTER PROGRAM?
1701:KEY PROGRAMMING
EXTENSION #?nnn
1701:EXT:nnn
KEY NUMBER?n
1701:EXT:nnn KEY:n
nnnnnnnnn
Feature
1
Key Code
Unde
fi
ned (blank) Key
00
Switched Loop Key
01
Fixed Loop Key
02
+ Trunk group (90-98)
Line Key
03
+ Line number (e.g., 1)
Park Orbit Key
04
+ Park Orbit (60-69)
Hotline Key
05
+ Hotline Partner’s Extension (e.g., 304)
Call Coverage Immediate Ring
06
+ Covered Extension (e.g., 304)
Call Coverage No Ring (lamp only)
07
+ Covered Extension (e.g., 304)
Call Coverage Delay Ring
08
+ Covered Extension (e.g., 304)
Group Pickup Immediate Ring
09
+ Pickup Group (1-16)