NEC 910i, Инструкция по установке и эксплуатации

Страница: 16 / 106

1-14
System Programming
The following system programming is suggested for the best operation of your cordless phone:
Programming - i-Series System
In program 0004 - Automatic Extension Circuit Type Setup :
1. Have the system automatically set the circuit type for each extension (the cordless phone is identified as circuit type 1).
In program 1006 - Programming Functions Keys (or SC 851):
1. Assign a loop key to one of the function keys. The system default setting has the function keys programmed for
lines1 - 4. By assigning a loop key, all required lines can be accessed (enter code 1078 - option 2).
In program 0909 - Extension Ring Group Assignment :
1. Assign the cordless phone’s extension to a Ring Group.
In addition to the other normal keyset programming, the following programs can be set so an optional desk phone can be used in
addition to the cordless phone:
In program 1009 - Cordless/Desktop Extension Assignment :
1. Assign the extension number for the cordless phone first and then assign the extension for the desk phone.
In program 1006 - Programming Function Keys :
1. Program a function key to be a Call Coverage key for the cordless phone’s extension as well as the desk phone’s
extension. Assign the desk phone’s extension to the cordless phone and the cordless phone’s extension to the desk
phone (enter code 1036 + extension number).
In program 1016 - Multiple Directory Number Ring Assignment :
1. Set the ringing assignment for the Call Coverage key for both the cordless phone and desk phone’s extension (Option
1 allows the calls to ring the extension).
Programming - Onyx VS i System
In program E8 - Ringing Line Preference :
1. Enable Ringing Ling Preference for the cordless phone’s extension number.
In program KS - Programming Keys for Keysets :
1. Assign a loop key to one of the function keys. The system default setting has the function keys programmed for
lines
1 - 4. By assigning a loop key, all required lines can be accessed (To assign a Loop Key, enter ‘9’ in KS program).
In program E2 - Extension Circuit Type :
1. Enter the circuit type of “02” for the cordless phone’s extension number.
In addition to the other normal keyset programming, the following programs can be set so an optional desk phone can be used in
addition to the cordless phone:
In program E9 - Direct Termination or Operator Extension :
1. Enter the cordless phone’s extension number. At the prompt “DIR TERM OR OPR EXT”, enter the extension num-
ber of the desk phone.
In program KS - Programming Keys for Keysets :
1. For the desk phone, assign a Station Pickup key with the cordless phone’s extension number (to assign a Station
Pickup key, enter ‘S’ + extension number in KS program).