24
Settings (M1)
2
For any volume setting, use
▲
▼
,
Side
keys or alphanumeric keys
(
0
to
9
).
2
When you change this setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
2
If the selected mode is Car mode, the backlight will always be turned on. This will accelerate the battery consumption.
No. Phone mode setting
1 Ringer
Selects the Sound or Video for incoming calls. (See “Sounds (M62)” on page 64 or “Videos (M61)” on page 64 for
details.)
2
If the Video is set, it will sound and will be displayed regardless of the CLI picture setting for the personal data in
Phonebook. (See “Allocating a picture as a CLI” on page 55.)
2 Ringer volume
Sets the sound volume for incoming calls.
2
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the
Side
keys.
2
While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired headset
and the speaker of the phone are saved individually.
2
While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker of the
phone is used.
3 SMS tone
Selects the ringtone for incoming SMS messages. (See “Sounds (M62)” on page 64 for details.)
4 SMS tone volume
Sets the sound volume for incoming SMS messages.
5 Mail tone
Selects the ringtone for incoming Mail or MMS messages. (See “Sounds (M62)” on page 64 for details.)
6 Mail tone volume
Sets the sound volume for incoming Mail or MMS messages.
7 Key tone
Turns on/off the key tone.
8 Service tone
Turns on/off the service tone.
9 Alarm volume
Sets the sound volume for Clock alarm and Schedule alarm.
0 Vibrator
Turns on/off the vibrator function.
Earphone setting
Selects the sound output from Earphone & Speaker or Earphone.
2
This option affects the wired headset.
# Auto answer
Selects whether to answer an incoming call automatically.
2
To use the Auto answer function, connect the headset to your phone and set the earphone volume to 1 or higher. If
the earphone volume is set to 0, you must turn the vibrator ON to use the Auto answer.
2
The Auto answer function only applies to the first incoming call. When you have another incoming call, you have to
answer it manually.