NDS Radiance Ultra 4K, Руководство пользователя

Страница: 8 / 32

2 | Safety Information
Power Requirements
Power Supply
This product complies to the listed safety standards only when used with the supplied medical grade power
supply:
Power Cord
Use the supplied hospital grade power cord with the correct plug for your power source.
• The power cord is the only recognized disconnect device for this product. To power off the product,
disconnect the power cord from the AC mains.
• The product and other medical equipment should be positioned so that the power cord and connection to AC
mains is readily accessible.
• If an extension cord or power strip is needed for connection of this product to AC mains, confirm that the
power cord plug can be securely connected to the cord or power strip.
• This product should be powered from a center tapped circuit when used in the US at voltages over 120 volts.
Grounding
This product is energized from an external electrical power source for MDD 93/42/EEC Class
I
equipment. It is the
responsibility of the installer to test the product’s earth ground to verify that it complies with the hospital, local
and national impedance requirements.
A ground post is located on the back of the product to use for grounding the chassis of the unit. Any such
grounding must be installed in accordance with applicable electrical codes. The ground post location is shown in
the illustration found on page 16.
Recycling
Follow local governing ordinances and recycling plans regarding the recycling or disposal of this
product.
Medical Device Shipping Symbols
Medical device shipping symbols, as defined below, are printed on the end panels of shipping containers used to
transport this product.
Model BridgePower BPM150S24F06
AC Input 100 - 240 Volts, 50 to 60 Hz
DC Output 24 Vdc, 6.25 A, 150 W
Conformité
Européenne
(European
Conformity) Position
container
up Keep dry Fragile Fragile,
keep dry