NDS Radiance Ultra 4K, Руководство пользователя

Страница: 18 / 32

12 | Display User Interface
Input Searching Mode:
On: Inputs will be searched in order from the last selected input and will keep cycling through the inputs until
a signal is found or until DPMS is enabled – see “DPMS Enable” on page 10.
Off: Input will remain set to the currently selected input regardless of presence of signal on that input.
Priority: Primary input will be displayed while there is signal on the Primary input. If there is no signal on the
Primary input, the input will be automatically switched to the Secondary input.
Note: If the Primary signal returns following an automatic switch to the Secondary input, input will then be
automatically switched back to the Primary input.
The above table shows which inputs may be selected as Secondary relative to selected Primary inputs. Inputs
marked with a

in the Secondary columns can be selected as Secondary. Gray cells mark inputs that share a
common connector or electronics, and cannot be used simultaneously.
SECONDARY
INPUT 4x 3G-SDI 3G-SDI-5 DisplayPort HDMI DVI-D
PRIM
AR
Y
4x 3G-SDI
   
3G-SDI-5
  
DisplayPort
  
HDMI
 
DVI-D
 