NDS Radiance G3, Руководство пользователя

Страница: 10 / 36

2
Notes
1. An S-Video signal may be applied via 2 BNC terminated cables to the Y and C labeled BNC connectors
or a DIN 4 terminated cable, but not both.
2. DVI 1 IN 1920 x 1200 maximum resolution. DVI 2 IN 1920 x 1080 maximum resolution .
3. 3G-SDI 1 and 3G-SDI 2 accept 3G-SDI signals. The provided accessory cable is not 3G-SDI compliant.
4. An RGBS , YPbPr or VGA signal may be applied via the DVI 2 connector or the R / Pr , G / Y / SOG 2 , B /
Pb and HS / C-SYNC BNC connectors. The VS BNC is used when the applied signal has both H sync and
V sync .
5. Set the REDRIVE switch to Off when the RGBS and YPbPr signals will not be daisy chained to another
display. The REDRIVE switch is set to On when the RGBS and YPbPr signals will be daisy chained to a
second display.
6. DVI 1 , 3G-SDI 1 and S-VIDEO re-drives are always active when the display is powered on.
7. FIBER OPTIC (90R0117 only) and DVI 1 inputs may be connected simultaneously, but may not be
displayed simultaneously.
8. The ND-OS connector is used for installing BIOS upgrades. The ND-OS connector may also be used for
controlling the display. See Communication Port on page 14.