111
Cirrus LT User Manual v2.3 - Chapter 6
Chapter 6: Making remote
connections
You can connect to a remote machine using the Teradici Firmware. Basic directions are in-
cluded below, but you can find more detailed information in the
Teradici PCoIP Zero Client
and Host Administrator Guide
.
*
Connecting to remote machines with Teradici
host cards
To set up a remote connection between your device and a remote machine, you
need an enterprise-level NAT device in both the source and destination networks.
Otherwise, your remote host would need an internet routable IP address.
To connect to a remote machine:
1.
Configure the enterprise NAT device to redirect TCP/UDP port 4172 to the
host card.
2.
From the device’s Teradici menus, configure the Direct to Host session con-
nection type, and enter the IP address of the destination enterprise NAT
device.
3.
From the host card’s AWI, configure the Direct from Client session connec-
tion type.
4.
On your firewall or router, allow both TCP and UDP traffic on the ports you
have configured in your NAT devices.
5.
Start a PCoIP session.
