NCR 7167, Руководство пользователя

Страница: 116 / 313

7167 Owner’s Manual Chapter 6: Commands
November 2002 94
Initialize Printer
ASCII: ESC @
Hexadecimal: 1B 40
Decimal: 27 64
Default: Receipt Slip
Character Pitch: 15.6 CPI 13.9 CPI
Column Width: 44 characters (80mm)
32 characters (58mm)
45 characters
Extra Dot Rows: 2 3
Character Set: Code Page 437 Code Page 437
Printing Position: Column One Column One
Clears the print line buffer and resets the printer to the default settings for the startup
configuration (refer to Default settings above.)
Single-Wide, Single-High, Non-Rotated, and Left-Aligned characters are set and User-
defined characters or logo graphics are cleared (Flash Memory is not affected). Tabs are
reset to default settings. Receipt selection state is selected.
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H40)
Set Slip Paper Eject Length
ASCII : ESC C n
Hexadecimal : 1B 43 n
Decimal: 27 67
n
Value of n : 0 to 255
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H43) & Chr$(n)
Exception:
This command is ignored.