NCR 7167, Руководство пользователя

Страница: 212 / 313

7167 Owner’s Manual Chapter 6: Commands
November 2002 190
Execute Macro
ASCII : GS ^ r t m
Hexadecimal : 1D 5E r t m
Decimal: 29 94 r t m
Value of r : The number of times to execute the macro.
Value of t : The waiting time for executing the macro.
Value of m : Macro executing mode
0 (Bit0): The Macro executes r times continuously
with waiting time specified by t .
1 (Bit0): The printer waits for feed button to be
pressed after waiting for the period
specified by
t . If the button is pressed,
the printer executes the macro once. The
printer repeats the operation
r times.
Executes a macro. After waiting for a specified period the LED indicators blink and the
printer waits for the Paper Feed Button to be pressed. After the button is pressed, the
printer executes the macro once. The printer repeats this operation the number of specified
times.
When the macro is executed by pressing the Paper Feed Button (
m = 1), paper cannot be
fed by using the Paper Feed Button.
Formulas:
The waiting time is t x 100 msec for every macro execution.
m specifies macro executing mode when the LSB (Least significant bit) m = 0
The macro executes r times continuously at the interval specified by t when the LSB (Least
significant bit) of m = 1.
Example:
MSComm1.Output = Chr$(&H1D) & Chr$(&H5E) & Chr$(r) & Chr$(t) & Chr$(m)
Exceptions:
If this command is received while a macro is being defined, the macro definition is aborted
and the definition is cleared.
If the macro is not defined or if
r is 0, nothing is executed.
This command is available in 7158 Native Mode and 7167 Native Mode only.