NCR 7167, Руководство пользователя

Страница: 46 / 313

7167 Owner’s Manual Chapter 2: Setting Up and Using the Printer
November 2002 36
3. Scroll back up to “Ports.”
If the devices are missing or are not listed correctly, the installation wasn’t successful.
You will need to reinstall the drivers.
If this information is not listed, then the installation was not successful. You will need
to reinstall the drivers.
Configuring Serial Port Number Assignments
This section described how the NCR USB solution assigns serial port numbers (e.g.,
COM x ) to the printer. The information that determines the assigned port number is
stored in the host computer and not in the printer. This assignment is made in one of
three ways. The first method is the default method that automatically assigns a serial
port number to the printer. The other two methods require the user to specify a port
number. These methods are described more fully in “Serial Port Configuration
Methods” on the following page.
Running the Edgeport Utility
You’ll need to run the Edgeport utility to check which serial port has been assigned to
the printer. This utility queries and configures the operating system and driver for the
information regarding the virtual serial port.
Windows 98
1. Open the Device Manager and make sure “View Devices By Type” is selected.
2. Scroll down to Universal serial bus controller, and expand the list by pressing the
“+” symbol. You’ll see two entries for your
NCR printer.